HCR CONTROL 15# DRY CLEANING CHEMICAL

HCR CONTROL 15# DRY CLEANING CHEMICAL

Description

Control is a dry extraction carpet cleaning compound designed specifically for carpets. Dry extraction cleaning is an easy and safe system that effectively cleans soiled areas, spots, and spills. Problems associated with wet cleaning methods are not found in this system because the product remains dry. Because this product is not liquid in nature, a long drying time is not required. This allows the immediate use of the carpet. Carpet may be walked on even during the cleaning process with no adverse effects. The active ingredients in this mixture emulsify and hold soils and may be removed by vacuuming when dry. Due to this quick application and drying time no residue is left behind to result in resoiling. The dry cleaning of carpets is recommended by many carpet manufacturers worldwide. Each pound of product cleans a 50 square foot (5 ft X 10 ft) area. For large areas, use with a Control Dry Cleaning Machine to remove dirt and grime from heavily soiled walk lanes, carpeting, and area rugs. This product is available in two sizes a one pound bag and a fifteen pound container for larger areas.

Recommended by dozens of carpet manufacturers worldwide to deep clean all types of carpet, including stain resistant fibers.

Features

• Eliminates over wetting 
• Reduces cleaning time 
• Cleaned carpets back in service quickly 
• Use for large areas or spot cleaning
• Emulsifies oil and grease
• Does not promote re‐soiling

Specification

Appearance:                Light Golden Brown
Odor:                           Citrus
Specific gravity:            NA
pH:                               Neutral
Biodegradable:            Yes
Emulsification:              Excellent

Directions

1. Vacuum carpet.
2. Pretreat using approved prespray sprayed over stained area in a fine mist. Cover the area to be cleaned with Control Powder. Use a dry extraction machine for cleaning large areas. For small areas or spots, work into the spot with a soft brush. If spot or spill is severe, pretreat using approved prespray and add more of this product if needed to remove the entire spot. NOTE: Do not rub too aggressively or damage to carpet may occur.
3. Allow this product to completely dry.
4. Vacuum.  
5. Repeat steps 2-4 until stain is gone. NOTE: If spill is wet blot up excess moisture with a towel or soft cloth prior to cleaning with this product.

Safety Cautions

Keep out of reach of children

Prior to using this or any cleaning product, make sure employees read and understand the hazard information found on the product label and Material safety data sheet. (MSDS). The label and MSDS will also provide information on handling precautions, protective equipment and first aid instructions which might be appropriate for this product.

After opening this package secure tightly to keep from drying out. This product is nontoxic by oral ingestion or by inhalation, however persons with unusual skin sensitivity should avoid direct contact. Avoid using in confined areas if you have respiratory problems. Neutral pH. In case of contact with eyes rinse to remove particles.  If irritation persists, or if swallowed call physician.