Jun
Spotting – Gum
Chewing gum can create a sticky mess on tables or in carpets! These tips will help carpet cleaners remove it quickly. For a few spots, use a GumGetter, Gel Break or GumBreak. For large amounts, use a GumBlaster wand if you have a truckmount which generates heat over 170 degrees F. The hotter, the better. In both cases, you will need to determine what agitation the carpet fiber can endure without damage.
Procedure –
With GumGetter
Step 1 – Break into the surface of gum with GumGetter
Step 2 – Apply Gel Break or GumBreak to surface. Give adequate dwell time.
Step 3 – Work GumGetter back and forth until it is loosened.
Step 4 – Repeat if necessary
With GumBlaster
Step 1 – Heat up Truckmount and pretest in an inconspicuous area to see if heat and 300 psi of pressure will harm carpet fiber
Step 2 – Direct the spray of your GumBlaster under closest edge of gum and work tool away from you, peeling up as you go
Step 3 – Agitate remaining residue with GumGetter and Gel Break or GumBreak. The regular residue will be removed during normal cleaning.
Helpful Hint: You may use Gel Break or GumBreak to highlight gum spots, since the white gel helps the spots stand out on carpets, for either method for subsequent removal.
Caution – Aggressive agitation with either method can damage carpet fibers
Type: Citrus solvent in gel form
Highlights: In gel form to allow more dwell time on spots without running into backing. Very safe.
Type: Gelled citrus spotter
Highlights: Solvent based, designed specifically for gum
Type: Gum removal tool
Highlights: Provides tremendous agitation for easy gum removal
Description: High volume air mover
Purpose: Dries carpet, upholstery & structures quickly
Do you like making more money? Try Cleaner’s Choice cleaning chemicals!
LOWER price = HIGHER profits with the same GREAT results
